User Tools

Site Tools


doc:rfc_firmware_syntax

OOBD Firmware Syntax

OOBD Team S. Koehler
Request for Comments:6
Obsoletes: -
Category: Standard March 2014

Status of this Memo

This memo provides information about how the OOBD firmware command syntax is been set up. Distribution of this memo is unlimited.

Copyright (C) OOBD Team (2014). All Rights Reserved.

Introduction

Under the assumption, that it will be mostly other software which talks to the interface, the command structure was made simple, but flexible.

To archive this, the interface knows only two different kind of inputs, data or parameters, the so called P- Commands

where the values are defined as (in EBNF- Syntax)

data = hex , { hex };
digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" ;
hex = "A" | "B" | "C" | "D" | "E" | "F" |"a" | "b" | "c" | "d" | "e" | "f" | digit ;

P- Commands

input:

p functionblock , command , value , {value} <CR>

where the definion is as follows

p = "p" | "P" ;
functionblock = number ;
command = number ;
value = number ;
number = digit  {digit } | "$" , hex , { hex } ;

Data Input

input:

data <CR>

Feedback

if the p-command or the data input were successfully procceded, the firmware answers with optional additional output and always with a trailing line containing a “.”, which signals the successful execution of the command.

someoutput
.

Errors

In case of an error, the firmware answers with a “:error:”, the functional block id, an error number and optional more error codes and Text

:error: 8 3 out of mem

Other Unrequested Outputs

All other outputs from the firmware, which are not an answer on a p- or data command, have to be started with a leading “#”

#some firmware message

Examples

Sending 11 bytes of data

input:

 112233445566778899AABB

if the number of input chars is not even, the last char is handled as MSB of the last byte, so

 112233445566778899AAB

is send as

 112233445566778899AAB0

Set the parameter 127 to 64:

p 127 64

the same, but with hexadecimal notation:

p $7F $40

Implementation Details

Sending data locks the input until the receive tasks times out

Security Considerations

This RFC has no security issues.

References

Authors' Addresses

Steffen Koehler

Phone: +49 172 410 35 98

EMail:steffen@koehlers.de

Appendix

Copyright (C) OOBD Team (2014). All Rights Reserved.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the OOBD Team organizations, except as needed for the purpose of developing standards in which case the procedures for copyrights defined in the Standards process must be followed, or as required to translate it into languages other than English.

The limited permissions granted above are perpetual and will not be revoked by the OOBD Team or its successors or assigns.

This document and the information contained herein is provided on an “AS IS” basis and THE OOBD TEAM DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.“ Relation to other RFCs

Updates

Obsoletes

Obsoleted-by

Updated-by

Contact

Distribution Lists

The OOBD-RFC announcements are distributed via the oobd-commit-messages@googlegroups.com mailing list.

To join (or quit) the list goto https://groups.google.com/forum/?hl=de&fromgroups=#!forum/oobd-commit-messages

This website uses cookies. By using the website, you agree with storing cookies on your computer. Also you acknowledge that you have read and understand our Privacy Policy. If you do not agree leave the website.More information about cookies
doc/rfc_firmware_syntax.txt · Last modified: 2014/05/25 09:32 by admin