Differences

This shows you the differences between two versions of the page.

--- doc:hw_firmware [2014/02/25 06:28] – created admin
+++ doc:hw_firmware [2014/09/05 06:30] (current) – admin
@@ Line 1: / Line 1: @@
 ====== How to flash an OOBD CAN Invaders with new OOBD-Firmware ======
+To update your dongle with the latest actual firmware, the easiest way is to use the [[tools_oobdflash|OOBDFlash]] program.
+Only in case you want to flash other firmware files, here's the manual way to do so:
@@ Line 21: / Line 23: @@
   OOBD D2 192
-With the command ''p 99 2'' the CAN-Invader will be set back, after that you will have a timeframe of 500 ms, in that you will force the CAN-Invader, with reiterated pressing of the "f"- key after booting, to jump into the bootloader.
+With the command ''p 0 99 2'' the CAN-Invader will be set back, after that you will have a timeframe of 500 ms, in that you will force the CAN-Invader, with reiterated pressing of the "f"- key after booting, to jump into the bootloader.
-  >p 99 2
+  >p 0 99 2
   fff