OOBD

User Tools

Site Tools

Trace:
doc:hw_commands

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
doc:hw_commands [2016/11/19 11:35] – [Bus Specific Commands (P 8) for the CAN Bus, used in D2 Design] admindoc:hw_commands [2016/11/19 11:39] – [Bus Specific Commands (P 8) for the CAN Bus, used in D2 Design] admin
Line 139: Line 139:
 |  4  |  0  |  0  |HS-CAN (Relais switch - OFF) |  | |  4  |  0  |  0  |HS-CAN (Relais switch - OFF) |  |
 |  4  |  1  |  0  |MS-CAN (Relais switch - ON) |  | |  4  |  1  |  0  |MS-CAN (Relais switch - ON) |  |
-|  10  |  <Filter-No> |  $<CAN-ID> |  set Filter CAN-ID (11bit CAN-ID 0x0000-0x07FF) where Filter-No is 1-20, i.e. p 8 10 1 $720 |  | +|  10  |  <Filter-No> |  $<CAN-ID> | set Filter CAN-ID (11bit CAN-ID 0x0000-0x07FF) where Filter-No is 1-N*, i.e. p 8 10 1 $720 |  | 
-|  11  |  <Filter-No> |  $<Mask-ID> |  set Filter Mask-ID (11bit Mask-ID 0x0000-0x07FF) where Filter-No is 1-20 and Filter Mask depends on Filter CAN-ID (0=don't care 1=match), i.e. p 8 11 1 $7F0 (here: $720 - $72F) |  | +|  11  |  <Filter-No> |  $<Mask-ID> |set Filter Mask-ID (11bit Mask-ID 0x0000-0x07FF) where Filter-No is 1-N* and Filter Mask depends on Filter CAN-ID (0=don't care 1=match), i.e. p 8 11 1 $7F0 (here: $720 - $72F) |  | 
-|  12  |  <Filter-No> |  $<CAN-ID> |  set Filter CAN-ID (29bit CAN-ID 0x00000000-0x1FFFFFFF) where Filter-No is 1-10, i.e. p 8 12 1 $18F30557 |  | +|  12  |  <Filter-No> |  $<CAN-ID> | set Filter CAN-ID (29bit CAN-ID 0x00000000-0x1FFFFFFF) where Filter-No is 1-N*, i.e. p 8 12 1 $18F30557 |  | 
-|  13  |  <Filter-No> |  $<Mask-ID> |  set Filter Mask-ID (29bit Mask-ID 0x00000000-0x1FFFFFFF) where Filter-No is 1-10 and Filter Mask depends on Filter CAN-ID (0=don't care 1=match), i.e. p 8 11 1 $1FFFFFF0 (here: $18F30550 - $18F3055F) |  |+|  13  |  <Filter-No> |  $<Mask-ID> | set Filter Mask-ID (29bit Mask-ID 0x00000000-0x1FFFFFFF) where Filter-No is 1-N* and Filter Mask depends on Filter CAN-ID (0=don't care 1=match), i.e. p 8 11 1 $1FFFFFF0 (here: $18F30550 - $18F3055F) |  |
 |  14  |  0  |  0  |set all 11bit CAN filter to CAN-ID $0000 and Mask-ID $07FF (= disable any CAN traffic to application) |  | |  14  |  0  |  0  |set all 11bit CAN filter to CAN-ID $0000 and Mask-ID $07FF (= disable any CAN traffic to application) |  |
 +|  * N: number of filters is implementation depending, see ''#define MAXCANFILTER='' in ''mc_can.h''  |||||
  
  
doc/hw_commands.txt · Last modified: 2017/04/02 07:09 by admin