OOBD

User Tools

Site Tools

Trace:
doc:hw_commands

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
doc:hw_commands [2016/05/01 20:32] – [Protocol Specific Commands (P 6) for the CAN Raw Protocol] admindoc:hw_commands [2016/05/20 14:20] – [Bus Generic Commands (P 9) for the CAN Bus] nexulm
Line 151: Line 151:
 ==== Bus Generic Commands (P 9) for the CAN Bus ==== ==== Bus Generic Commands (P 9) for the CAN Bus ====
  
-^  Command  ^  Value1  ^  Value2  ^  Meaning  ^  Errorcodes  ^ + 
-|  0  |  0  |  0  | show info which interface/bus is active (i.e. CAN-Bus)  |   | +^  Command  ^  Value1  ^  Value2  ^  Meaning  ^  Errorcodes  | 
-|  0  |  3  |  0  | show info of CAN transceiver operating mode  |   | +|  0  |  0  |  0  |show info which interface/bus is active (i.e. CAN-Bus) |  | 
-|  0  |  4  |  0  | ??  |   | +|  0  |  3  |  0  |show info of CAN transceiver operating mode |  | 
-|  0  |  5  |  1  | read different CAN error counters  |   | +|  0  |  4  |  0  |?? |  | 
-|  0  |  5  |  2  | delete all software internal CAN error counters  |   | +|  0  |  5  |  1  |read different CAN error counters |  | 
-|  0  |  10  |  0  | show all 11bit CAN-ID filter, each line with two 11bit CAN-filters like: \\ <CAN-ID> <Mask-ID> <CAN-ID> <Mask-ID>  |   | +|  0  |  5  |  2  |delete all software internal CAN error counters |  | 
-|  0  |  11  |  0  | show all 29bit CAN-ID filter, each line with one 29bit CAN-filter like: \\ <CAN-ID> <Mask-ID>  |   |+|  0  |  10  |  0  |show all 11bit CAN-ID filter, each line with two 11bit CAN-filters like:  \\  <CAN-ID> <Mask-ID> <CAN-ID> <Mask-ID> |  | 
 +|  0  |  11  |  0  |show all 29bit CAN-ID filter, each line with one 29bit CAN-filter like:  \\  <CAN-ID> <Mask-ID> |  | 
 + 
 + 
 +   fgsfsdfsdf 
 + 
 + 
 +sfdsdfsd 
 + 
 + 
 +sfsdfsdf 
 + 
 + 
 +sfsdf 
 + 
 + 
 +\\
  
doc/hw_commands.txt · Last modified: 2017/04/02 07:09 by admin